Shaker System Components
| No |
CONFIGURE |
QUANTITY |
| 1. |
Shaker |
|
| |
SN-200KN vibration |
1 |
| Cu-2 Cooling unit model |
1 |
| 2. |
Amplifier |
|
| |
SDA-200 digital switch amplifier （include field power） |
1 |
| 3. |
Controller ------------Vibstar multifunctional vibration controller |
|
| |
Sine（rated frequency、frequency sweep）、random、shock、sine resonance search, track and dwell (RSTD) |
|
| A4 HP Colored ink-jet printer |
1 |
| 100 piezoelectric acceleration sensor (including mininoise cable) |
4 |
| Software disc |
1 |
| Manual |
1 |
| 4. |
Auxiliary ------------ |
|
| |
VT2020 Vertical Expander (Magnesium alloy) |
1 |
| |
LTT2020 Slip table (Magnesium alloy) |
1 |
| |
Shoring |
1 |
| 5. |
Accessory ------------ |
|
| |
Cable |
1 |
| Tools |
1 |
SN-200KN Features of vibration
Double magnetic circuit: comparing with single magnetic circuit, magnetic strength is stronger, volume and flux leakage is smaller.
Unframed coil：the system becomes lightweight by reason of unframed coils. Also acceleration and fundamental resonance
frequency are large enough to make the wave distortion small, also excellent heat dissipation.
Suspension system：suspension system and linear bearing guidance make both the oriented capability and anti-overturning well.
Choose air suspension with small dynamic stiffness and large static stiffness : good bearing capacity and low frequency function.
Trunnion vibration isolation：Perpendicular vibration without foundation.
Air-cooled blower uses new-style air duct design, increasing the cooling effect.
Parameter
| Sine (peak) |
200KN |
| Random (RMS) |
200KN |
| Shoke (peak) |
400KN |
| Usable frequency range |
5～2100 Hz |
| Maximum displacement（p-p） |
51 mm |
| Maximum velocity |
2 m/s |
| Maximum acceleration |
1000 m/s² |
| Maximum load |
2500 kgs |
| Body suspension natural frequency |
2.5 Hz |
| Armature diameter |
Ф650 mm |
| Armature effective nominal weight |
150kg |
| Load Attachment Points |
25×M12 |
Military Equipment Test Cases
Shaker System Components
.jpg)
